I believe that everyone will not be unfamiliar with the stenter setting machine, because it is one of the important products and main keywords in the website, so I have already started its introduction. In order to let everyone gradually familiarize and understand this equipment. In the following, this work will be carried out, and its main purpose is to promote the learning process of the product, so that everyone can benefit from it.
1. In the tenter setting machine, if a burner is used, which one is more suitable?
In the tenter setting machine, if the burner is used, it mainly depends on the specific technical requirements and equipment-related configuration. These two determine the type of burner. Therefore, on this question, if you ask this question, it is difficult to answer, because no specific answer can be given. Only after knowing these two specific aspects can you make a decision.
2. In the tenter setting machine, is the temperature difference between the front and rear and left and right the same?
In this type of setting machine, the tenter setting machine has a temperature difference between the front and the rear and the temperature difference between the left and right. Moreover, these two temperature differences are not the same. So, on this question, the answer is not the same. Moreover, generally speaking, the temperature difference between front and rear is larger than the temperature difference between left and right. The temperature difference between the left and right of the setting machine is also related to the manufacturing process. Therefore, this issue will be considered when designing the machine.
3. Is the speed adjustment method the same for different series of stenters?
Different series of tenter setting machines have different speed adjustment methods, because their working temperature, fabric width, and fabric requirements are different, so the method is not universal. Moreover, everyone should have a correct understanding of this point, and make no mistakes, so as not to affect the speed adjustment work of the setting machine, and then, various problems occur.
https://www.sunwinmachinery.com/
